Lamp Replacement - Beko HNE 51210 S Bedienungsanleitung

Using the Appliance
3

3.4 Lamp Replacement

MAX: 3 W
Disconnect the hood from the mains-
supply. This appliance is equipped with
3 W spot LED lamps.
WARNING
A
Prior to touching the light bulbs en-
sure they are cooled down.
Remove the suction gril to access the
lamp area.
Replace the damaged lamp.
Use E14 3W max LED lamps only. For
more details, check enclosed leaflet
"ILCOS D" (alfanumeric position "1d").
If the lights do not work, make sure that
the lamps are fitted properly into their
housings before you call for technical
assistance.
A
Before replacing the light bulbs,
disconnect the power supply of the
hood.
A
Do not touch the light bulbs when
they are hot.
Hood / User Manual
A
Be careful not to touch the replaced
light bulb directly with hands.
C
You may procure lamps from
Authorised Service Agents.
9 / EN