Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safeguards - Concept ZN 8010 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 52
Model
Power Input
Voltage
Stainless Steel Soleplate
Special Soleplate Anodia, Extra Scrape Resistant
Easy to Clean
Auto-Off Safety Device Function in horizontal
and vertical posotion

IMPORTANT SAFEGUARDS

Read the instructions carefuly in full, before the first use. Ensure, the other
persons who could handle with appliance, to be informed about instructions too.
The mains supply voltage have to conform with values on rating plate.
Use iron only for its intended domestic use.
To protect against a risk of electric shock, do not immerse the iron in water or
other liquids.
The iron should always be turned to minimum before plugging or unplugging from
outlet.
Never pull cord to disconnect from electrical outlet; instead, grasp plug and pull to
disconnect.
Do not allow cord to touch hot surfaces.
Allow the iron to cool completely then store in the upright position on its heel.
The cord can be wrapped around the stowage facility at the rear of the iron.
Do not touch hot surfaces.
High temperatures are generated during use which could cause burns.
Always use the handle and warn others (especially children) of the possible dangers
of burns from steam, hot water or the soleplate, especially when ironing vertically.
Always disconnect iron from electrical outlet when not in use.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
Check the cord periodically for possible damaged.
Store the unit out of reach of children.
Do not allow the power cord to hang down over edges where it can be reached by
children.
Electric iron must be used and layed only on stable surfaces.
When putting the iron into the iron stand, make sure the surface is stable.
Do not use electric iron if it has been dropped, it is leaking or if you can observe the
visible marks of damage.
Electric iron is not intended for usual usaje.
ZN 8010, ZN 8020, ZN 8030
Technical data
ZN 8010
UK
ZN 8020
ZN 8030
2200 W
230 V
41

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Zn 8020Zn 8030

Inhaltsverzeichnis