Important Safety Precautions - Concept ZN 8022 Bedienungsanleitung

EN
ACKNOWLEDGMENT
Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life.
Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place
for future reference. Make sure other people using the product are familiar with these instructions.
Model
Model
Power input
Power input
Voltage
Voltage
Stainless-steel ironing surface
Anodia ironing surface
SELF-CLEAN
SELF-CLEAN
ANTI-DRIP
ANTI-DRIP
ANTI-CALC
ANTI-CALC
AUTO SHUT-OFF
AUTO SHUT-OFF

IMPORTANT SAFETY PRECAUTIONS:

• Use the unit only as described in this operating manual.
• Remove all the packaging and marketing materials from the unit before the first use.
• Make sure the mains voltage corresponds to the values on the rating plate. Use grounded wall outlets only.
• The unit reaches high temperatures during operation and remains hot for some time after being turned off. Do
not touch the hot surfaces. Use the handles and buttons. There is a risk of being burned.
• Do not leave the unit unattended while it is turned on or even only plugged into the wall outlet.
• Unplug the unit from the wall outlet when not in use.
• When disconnecting the unit from the wall outlet, never pull the power cord. Grasp the plug and disconnect it
by pulling.
• Do not allow children or unskilled people to handle the unit. Use the unit out of the reach of these individuals.
• Person with limited movement capacities, reduced sensory perception, insufficient mental capacity or those
who are unaware of the proper handling shall use the product only under the supervision of a responsible,
aware person.
• Take extra care when using the unit near children.
• Don't let anyone use the unit as a toy.
• Use only accessories recommended by the manufacturer.
• Never use an appliance with a damaged power cord or plug. Contact an authorized service center immediately
to have defective components repaired or replaced.
• Keep the vacuum cleaner away from heat sources such as radiators, ovens, and so on. Do not expose the product
to direct sunlight or moisture.
• Do not touch the unit with wet or damp hands.
• The unit is suitable for domestic use only. It is not designed for commercial operation.
• Do not immerse the power cord, plug, or appliance into water or any other liquid.
• Check the appliance and power cord for damage regularly. Do not switch on a damaged unit.
• Turn the unit off, unplug the power cord from the wall outlet, and let the unit cool before cleaning and after use.
ZN8007, 8009
ZN 8022 | ZN 8032
Technical parameters
Technical parameters
ZN 8007
ZN 8022
1800 W
2 000 W
230 V ~ 50 Hz
220–240 ~ 50/60 Hz
•
•
•
•
•
•
•
•
–
–
ZN 8009
ZN 8032
2200 W
2 200 W
230 V ~ 50 Hz
220–240 ~ 50/60 Hz
•
•
•
•
•
•
•
•
•
•
EN
31
33