Soleplate; Heating Element; Temperature Indicator Light; Maximum Water Level Indicator - Concept ZN 8010 Bedienungsanleitung

UK
13. Stainless Steel Soleplate.
The soleplate is treated with stainless steel to reduce friction between itself and
garments, thereby decreasing the effort to iron.
14. Integrated Heating Element.

15. Temperature Indicator Light

Align the desired setting with the temperature indicator light. When illuminated, indicates
element is heating.

16. Maximum Water Level Indicator.

Do not exceed the maximum water level when the iron is in the upright position.

17. Water Inlet Cover.

The wide water inlet cover allows for easy filling without bubbling.
19. Fine Spray Mist
Pressing the spray button
INSTRUCTIONS FOR USE
Please read these instructions carefully before using the iron.
- Remove any sticker or protective cover from the soleplate before using the
iron.
- Use for the first time on an old piece of fabric to ensure the soleplate and
water tank are
- When first used some vapor may be emitted, after a short while, however, this
will cease.
Setting the temperature
First sort items to be ironed, according to (the International Textile Care Labeling Code).
Iron fabrice requiring the coolest temperatures first. Work gradually to be higher
temperatures. Both the temperature dial and most items of laundry have markings
corresponding with this code.
44
provides a fine mist spray to dampen hard to iron fabrics.
19
completely clean.
ZN 8010, ZN 8020, ZN 8030