Important Safety Rules - Concept ZN 8001 Bedienungsanleitung

Model
Power input
Voltage
Stainless-steel ironing surface
Anti - drip
Anti - calc
Anti - drip = Function preventing dripping.
Anti - calc = Function preventing scale deposition.

IMPORTANT SAFETY RULES

Before first product use study carefully the whole operation manual. Ensure that
other persons handling the product were acquainted with this manual.
External voltage has to correspond with the value in the name plate.
Use the iron in the house only for assigned application.
Due to electrical accident prevention never dip the iron into water, or other liquids.
When coupling and decoupling the iron to the socket always set the iron to minimum
power.
When disconnecting the iron from the socket never pull the cable, but grip the plug
and pull it out.
Prevent any contact of the flexible cord with hot surfaces.
Store away the iron in vertical position on the back face. Before storing cool it
down.
Never touch hot surfaces.
When used the iron high temperature grows that can cause burns.
Always use grip and warn others (in particular children) against possible risk of
scalding by vapour and hot water, or burning by working plate, particularly when
ironing in vertical position.
Disconnect the iron from the socket if not used.
If damaged, the flexible cord should be replaced by skilled person to prevent
accidents.
Regularly check the flexible cord for damages.
Store the appliance out of reach of children.
Prevent the flexible cord from falling over an edge within reach of children.
The filling openning must not be open during operating of appliance.
Electric iron must be used and layed only on stable surfaces.
When putting the iron into the iron stand, make sure the surface is stable.
Do not use electric iron if it has been dropped, it is leaking or if you can observe the
visible marks of damage.
Electric iron is not intended for usual usaje.
ZN 8001, ZN 8002
Technical Parameters
ZN 8001 ZN 8002
1600 W 1800 W
220 - 240 V 220 - 240 V
UK
21