Storage; Troubleshooting; Possible Cause; Disposal And Recycling - Parkside PHS 9500 A1 Montage-, Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

13. Storage

Store unused devices with attached protective cover in a dry,
locked place out of the reach of children.
To extend the service life of the hedge trimmer and guarantee
smooth operation, before storing for a longer period.
Thoroughly clean the device.
Treat all movable parts with an environmentally friendly oil.
Never use any grease!
Slide the protective cover on the cutting device.
Remove the spark plug connector.
Empty the fuel tank completely.
Dispose of remaining fuel in an environmentally compatible
manner.
Operate the engine until the carburettor is empty.
Attach the knives protection (F).

15. Troubleshooting

Fault

Possible cause

Hedge trimmer does not •
work. •
•
•
•
•
Hedge trimmer cuts with •
interruptions
•
Engine is running, cutting •
device does not move •
•
Cutting device gets hot •
•
No fuel supply
Fault in the fuel line
Fuel filter clogged
Spark plug defective
Carburettor defective
Internal fault
Internal fault
ON / OFF switch defective
Cutting device blocked
Internal fault
Clutch defective
Missing lubrication => friction
Cutting blades are blunt

14. Disposal and recycling

The equipment is supplied in packaging to prevent it from be-
ing damaged in transit. The raw materials in this packaging
can be reused or recycled.
The equipment and its accessories are made of various types
of material, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your dealer or your
local council.
The packaging is wholly
environmentally-friendly materials that can be
disposed of at a local recycling centre.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
Remedy
• Check the fuel quantity
• Check the fuel line for kinks or damages
• Clean/replace the fuel filter
• Replace the spark plug
• Manufacturer or responsible customer service must
be called
• Manufacturer or responsible customer service must
be called
• Manufacturer or responsible customer service must
be called
• Manufacturer or responsible customer service must
be called
• Remove object
• Manufacturer or responsible customer service must
be called
• Manufacturer or responsible customer service must
be called
• Oil the cutting device
• Have the cutting device sharpened
composed of
GB/MT 43