Replacing The Batteries - LIVARNOLUX HG01495A Montage-, Bedienungs- Und Sicherheitshinweise

Fix the mounting plate
cross-head screwdriver (Fig. B).
Press the caps
7
After mounting, check that the mounting plate
Fit the main unit
into the respective slots on the upper side of the mounting plate
Ensure the product is correctly seated.
Secure the main unit
Adjust both LED spotlights
lights are independently rotatable and tiltable.
2
Your product is now ready for use.

Replacing the batteries

Loosen the screw on the bottom of the main unit
cross-head screwdriver.
Detach the main unit
Press the lugs on both sides and remove the battery compartment
cover (Fig. D). Be careful as the battery compartment cover is
8
under tension.
Remove the exhausted batteries from the battery compartment
and replace with new batteries of the same type (Fig. E). Be sure
to insert the batteries in correct direction. The correct polarity is
shown inside the battery compartment.
Close the battery compartment cover
Fit the main unit
into the respective slots on the upper side of the mounting plate
. Ensure the product is correctly seated.
5
Secure the main unit
using the screws
5
onto the screws
onto the mounting plate
1
with the screw on the bottom (Fig. A).
1
to your desired angle. The LED spot-
2
from the mounting plate
1
onto the mounting plate
1
with the screw on the bottom (Fig. A).
1
with a suitable
4
.
4
is fitted securely.
5
. Insert the 2 lugs
5
1
5
(Fig. D).
8
. Insert the 2 lugs
5
.
5
with a suitable
(Fig. C).
9
GB/CY 13