LIVARNO LUX LLES B2
Turn the LUX control (13) clockwise (
lighting conditions.
Turn the LUX control (13) anti-clockwise (
lighting conditions.
Cleaning / maintenance
Maintenance
The energy-saving outdoor spotlight does not contain any parts that require maintenance.
Replacing the light bulb
The circuit must be disconnected during all work on the energy-saving outdoor spotlight, even
when changing the light bulb! There is a risk of an electric shock!
Only use energy-saving spiral light bulbs with E27 base and a maximum power of 23 watts!
Loosen the 2 screws (1) with a Phillips screwdriver
and carefully tilt the front pane (9) downwards.
Unscrew the old/defective energy-saving light
bulb (10) anti-clockwise out of the socket. Then
screw a new energy-saving light bulb of the same
design (see "Technical data" section) clockwise
into the socket. When doing so, handle the energy-
saving light bulb (10) by its base and not by its
glass body. The bulb should only ever be handled
with a cloth. Close the front pane (9) upwards
now and tighten the 2 screws (1) again.
Switch on the circuit again.
10 - English
direction) so that the motion sensor (8) responds to brighter
direction) so that the motion sensor (8) responds to darker