Recommendations For Use; Correct Disk Use Table; End Of The Day Cleaning; Extended Periods Of Disuse - FIMAR FNT Benutz Und Wartungsanleitung

Recommendations for use

Before cutting product, completely lift the press handle, release the lock lever, insert the first plastic ejector disk and then the
fixed disk and rotating disk, or just the rotating disk according to need. Aligning the plastic disk with the two pins on the rotating
shaft plate and securing the cutting disk in its bayonet housing is recommended.
INFORMATION: the ejector disk must always be inserted for correct machine operations.

Correct disk use table

Slice
Julienne
Julienne
Dice
Shred
Grate

End of the day cleaning

•
Remove the plug from the electrical socket at the end of the day.
•
Accurately clean using neutral products.
•
Clean external machine parts with a damp sponge.
•
Do not use metallic pads and abrasive detergents.

Extended periods of disuse

For extended periods of disuse, turn off the main wall switch, clean the machine and cover it with a cloth to protect if from dust.
Rotating disk
E1 - E2 - E3 - E4 E5 - E6 -
E8 - E10 E14 - S1 - S2
E6 – E8 – E10 – E14
H2,5 – H4 – H6 – H8 – H10
E8 – E10 – E14
Z2 – Z3 – Z4
V
USE AND CLEANING
INFORMATION
Fixed disk
NO
B6 – B8 – B10
NO
D8X8 – D10X10 – D12X12 –
D20X20
NO
NO
3
Product insertion opening
OVAL
CIRCULAR
OVAL
CIRCULAR
OVAL
CIRCULAR
OVAL
CIRCULAR
OVAL
CIRCULAR
OVAL
CIRCULAR