Use And Handling Of The Cordless Electrical Power Tool - Parkside PAS 4 B4 Originalbetriebsanleitung

e) Maintain power tools and accessories. Check for misalign-
ment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool bits, etc., in accor-
dance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from
oil and grease. Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in unexpected
situations.
5. Use and handling of the cordless electrical
power tool
a) Charge a rechargeable battery using only the charger recom-
mended by the manufacturer. Chargers are often designed for
a particular type of rechargeable battery unit. There is a risk of
fire if a battery charger specified for a particular type of battery
is used with other batteries.
b) Only the rechargeable battery units supplied are to be used
with an electrical power tool. The use of other rechargeable
battery units may lead to the danger of injury or fire.
GB │ IE
■ 36
│
PAS 4 B4