Use And Handling Of The Cordless Electrical Power Tool; Service; Safety Instructions For Cordless Drills - Parkside PABS 12 B2 Originalbetriebsanleitung

g) Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice, and
the stipulations drawn up for this par-
ticular type of device. In doing this, take
into account the working conditions
and the task in hand. The use of electrical
power tools for purposes other than those in-
tended can lead to dangerous situations.
5. Use and handling of the cord-
less electrical power tool
a) Charge a rechargeable battery unit
using only the charger recommended
by the manufacturer. Chargers are often
designed for a particular type of rechargeable
battery unit. There is the danger of fire if other
types of rechargeable battery units are used.
b) Only the rechargeable battery units
supplied are to be used with an elec-
trical power tool. The use of other recharge-
able battery units may lead to the danger of
injury or fire.
c) When they are not being used, store
rechargeable battery units away from
paperclips, coins, keys. nails, screws
or other small metal objects that could
cause the contacts to be bridged. Short-
circuiting the contacts of a rechargeable battery
unit may result in heat damage or fire.
d) Fluids may leak out of rechargeable
battery units if they are misused. If this
happens, avoid contact with the fluid.
If contact occurs, flush the affected area
with water. Seek additional medical
help if any of the fluid gets into your
eyes. Escaping battery fluid may cause skin
irritation or burns.
CAUTION! DANGER OF EXPLOSION!
The batteries must never be recharged!
General safety advice for electrical power tools

6. Service

a) Only have the power tool repaired by
qualified professionals using OEM
spare parts. This ensures the safety of the
power tool is maintained.
lead needs to be replaced, always
have the replacement performed by
the manufacturer or its service centre.
This will maintain the safety of the device.
Note: spare parts not listed (e.g. carbon brushes,
switch) can be ordered through our call centre.
Safety instructions
for cordless drills
Use the accompanying handle when
using the device. Losing control can result
in injury.
Hold the device by the insulated
handles when performing work whe-
re there is a risk of screws or the tool
hitting hidden electrical wires. Contact
with a live wire can also charge metal parts of
the device, which may lead to electric shock.
Protect the rechargeable bat-
tery from heat, e.g. including
continuous sun exposure,
fire, water, and moisture. Risk
of explosion.
If the plug or the mains
GB/IE 9