Gas Connection; Function Check; Warnings; Technical Data Truma Varioheat - Truma VarioHeat Einbauanweisung

Gas connection

The 30 mbar operating pressure of the gas supply must
correspond to the appliance's operating pressure (see
type plate).
The Ø 8 mm gas supply duct must be attached to the gas
connection with an olive screw connection. Carefully counter-
hold with another wrench when tightening.
The gas connection on the appliance may not be shortened or
bent.
Before connecting to the appliance, please ensure that the
gas ducts are free of dirt, shavings and the like.
The ducts must be routed in such a way that the appliance is
easy to remove for service work.
The number of separation points in the gas supply line in
rooms used by persons must be limited to the technical
minimum.
The gas system must comply with the technical and admin-
istrative regulations of the respective country of use (e.g.
EN 1949 for vehicles in Europe). The national laws and regu-
lations (e.g. DVGW Worksheet G 607 for vehicles in Germany)
must be observed.

Function check

Following installation, the gas system must be checked for
leaks in the first inspection by using the pressure drop meth-
od in accordance with EN 1949.
Then check all appliance functions as described in the operat-
ing instructions.
The operating instructions must be handed over to the vehicle
owner.
The year when the equipment was first put into opera-
tion must be indicated with a cross on the type plate.

Warnings

The installer or vehicle owner must affix the yellow warning
information sticker that is provided with the appliance to the
vehicle in a location that is clearly visible to all users. Missing
stickers can be requested from Truma.
18

Technical data Truma VarioHeat

Determined in accordance with EN 624 and/or Truma test
conditions.
Gas type
Liquefied gas (propane / butane)
Operating pressure
30 mbar (see type plate)
Rated heat output (gas consumption)
Truma VarioHeat eco
1300 W (100 g/h) / 2800 W (220 g/h)
Truma VarioHeat comfort
1300 W (100 g/h) / 2800 W (220 g/h) / 3700 W (290 g/h)
Additional information in accordance with EN 624
Truma VarioHeat eco
Q = 3.1 kW (Hs); 230 g/h; C
n
Truma VarioHeat comfort
Q = 4.1 kW (Hs); 300 g/h; C
n
Destination countries
AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HR, HU,
IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR
Air delivery volume
Truma VarioHeat eco
75 / 155 m³/h
Truma VarioHeat comfort
75 / 155 / 210 m³/h
Power consumption at 12 V
Truma VarioHeat eco
0.65 / 2.75 A
Truma VarioHeat comfort
0.65 / 2.75 / 5.4 A
Quiescent current consumption
with Truma CP plus VarioHeat
0.004 A
with Truma CP classic VarioHeat
0.001 A
Weight
Heater without peripheral devices:
5.1 kg
CE product identification number
CE-0085CR0203
E1 10R-058062
Subject to technical changes.
; I
13 3B/P (30)
; I
13 3B/P (30)