Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PLLA 12 B2 Originalbetriebsanleitung

Before use

Removing/charging/inserting the battery pack

CAUTION!
► Always unplug the appliance before you remove the battery
pack
battery charger
NOTE
► The battery pack is supplied partially charged. Before first use,
charge the battery pack
for at least 1 hour. This ensures maximum performance of
the battery pack
at any time without shortening its service life. Interrupting the
charging process does not damage the battery pack
► If the battery pack
be charged. Allow it to cool down first.
■ Never charge the battery pack
below 10°C or above 40°C.
1. To remove the battery pack
pull the battery pack
2. Insert the battery pack
3. Insert the mains plug into the socket. The control LED
red .
4. The green charge level indicator LED
charging process is complete
for use.
5. Insert the battery pack
PLLA 12 B2
from or connect the battery pack to the high-speed
.
. You can charge the lithium-ion battery
overheats during operation, it cannot
out of the appliance.
in the high-speed battery charger
if the ambient temperature is
, press the release buttons
into the high-speed battery charger
indicates that the
and the battery pack
into the appliance.
.
and
.
lights up
is ready
GB │ IE │
39 ■