Guidance Information; About These Instructions; Original Instructions; Identification Of Safety Instructions - Wilo Stratos MAXO Einbau- Und Betriebsanleitung

en
1

Guidance information

1.1

About these instructions

These instructions enable the safe installation and initial commis-
sioning of the pump.
▪ Read these instructions before commencing work and keep them in
an accessible place at all times.
▪ Observe instructions and labelling on the pump.
▪ Observe local regulations where the pump is installed.
▪ Follow the detailed instructions online.
➜ See QR code or www.wilo.com/stratos-maxo/om
1.2

Original instructions

The German language version represents the original instructions.
All other language versions are translations of the original instruc-
tions.
1.3

Identification of safety instructions

These installation and operating instructions set out safety instruc-
tions for preventing personal injury and damage to property, which
are displayed in different ways:
▪ Safety instructions relating to personal injury start with a signal
word and are preceded by a corresponding symbol.
▪ Safety instructions relating to property damage start with a signal
word and are displayed without a symbol.
Signal words
▪ Danger!
Failure to observe safety instructions will result in serious injury or
death!
28
▪ Warning!
Failure to follow instructions can lead to (serious) injury!
▪ Caution!
Failure to follow instructions can lead to property damage and pos-
sible total loss.
▪ Notice!
Useful information on handling the product
Symbols
These instructions use the following symbols:
General danger symbol
Danger of electric voltage
Warning of hot surfaces
Warning of magnetic fields
Notices
1.4

Personnel qualifications

Personnel must:
▪ Be instructed about locally applicable regulations governing acci-
dent prevention.
▪ Have read and understood the installation and operating instruc-
tions.
Personnel must have the following qualifications:
WILO SE 2019-11