Programmed Play - Clatronic mc 1016 Bedienungsanleitung

Description of the CD buttons
PLAY/PAUSE
SKIP I (2/36):
SKIP I (3/37):
STOP (1/38):
REPEAT/RAN. (33):
1. Press the STOP key
2. Press the PROGRAM key (7/34).
3. PROG. and „P01" (memory location) fl ash in the display.
4. Use the SKIP/SEARCH buttons to select the desired track and then press the
PROGRAM button again.
5. The display changes to memory slot P02.
6. Use the SKIP/SEARCH buttons to select the next track and press the
PROGRAM button again. Repeat the procedure until all the desired tracks are
selected.
7. Press the PLAY/PAUSE key. Playback begins (PROG. and
display). Press this button to pause briefl y the playback.
MC1016CD_neu 55
II (4/35): You can briefl y interrupt the playing. The symbol
fl ashes in the display.
Press once =
Press a second time = This jumps back to the
Press a third time =
With this button you can jump to the following track
or the next track but one etc. If the button is kept
pressed down, the machine starts to search through
the tracks.
The CD is stopped.
Press once =
Press a second time = the whole CD is played
Press a third time =
Press a fourth time =

Programmed Play

This starts the current track
again from the beginning.
previous track.
This plays the song before
etc. If the button is kept
pressed down, the machine
starts to search through the
tracks.
he current track is repeated
continuously (REPEAT
appears in the display).
continuously ( appears
in the display).
The display (26) contains the
word RANDOM and the track
number that is to be played
fi rst. All tracks are played
back in random order.
The function is deactivated
and the CD is played in the
normal mode.
appear in the
11.10.2005, 12:28:10 Uhr
GB
55