Programmed Playback; Playing Back Music In Mp3 Format; Cleaning And Maintenance - Clatronic mc 1024 mp3 Bedienungsanleitung

GB
1. Press the
2. Press the PROGRAM (7/32). The letters PROG and „P01" (storage location)
fl ash in the display (14).
3. Press the I
then press the PROGRAM button again.
4. The display changes to storage location P02.
5. Press the I
GRAM button again. Repeat this process until you have selected all tracks.
6. Press the
button you can also briefl y interrupt the programme.
7. Press once the
8. To play the programme again, press the
shows PROG and
9. To delete the program, press the
goes out. The programme is also deleted if you change to another mode, e.g.
TUNER, remove the CD from the CD compartment or switch the machine off.
The device stops automatically once the entire sequence of programmed tracks
is completed. The programmed sequence remains in the memory until the CD is
taken out of the CD deck or until the device is switched off. In order to play the
programmed sequence again, press the
It is also possible to combine the programmed tracks with the MODE function. Af-
ter you have programmed and started the device, please press the MODE button
up to fi ve times and then you can use the functions as described under „MODE".
With this device it is possible to play back pieces of music in MP3 format. The
device also supports all standard CD types: CD, CD-RW, CD-R. Up to 200 tracks
can be compressed and stored on these CDs. Your machine detects an MP3 CD
automatically (the word MP3 appears in the display). If you would like to play one
of these CDs, proceed as described under „Playing CDs". Tracks can be program-
med as described under „Playing Back Programmed Tracks".
Note: Due to differences in the quality of CDs and CD blanks, as well as
the large number of different software writing programs and the non-com-
pliance with fi xed standards by the music industry (copy protection), there
may be problems with the playback of CDs. This is not a malfunction of the
device.
• Always remove the mains plug before cleaning the machine.
• Any marks on the surface can be wiped off with a slightly damp cloth without
any additives.
52
05-MC 1024 52

Programmed Playback

STOP key.
/ I SKIP buttons (2/3/36/37) to select the desired track and
/ I buttons to choose the next track and press the PRO-
II PLAY/PAUSE button (4/35). Playback now begins. With this
STOP key to stop the playback while retaining the program.
).

Playing back Music in MP3 Format

Cleaning and Maintenance

II PLAY/PAUSE button (display
STOP key twice. The PROG control lamp
II PLAY/PAUSE key.
05.04.2005, 14:25:24 Uhr