Important; Normal Use; Maximum Electrical Capacity - ERBE VIO ReMode Bedienungsanleitung

OBJ_DOKU-184600-004.fm Seite 17 Montag, 14. September 2015 11:18 11

IMPORTANT!

Please read all information carefully.
These instructions for use do not replace the user manual of the
electrosurgical unit used! Read the user manual of the electro-
surgical unit and ask Erbe or your distributor in case of doubt!
1

Normal use

The electrode handle is intended for monopolar cutting and co-
agulation with the following units/accessories:
• Erbe VIO 300 D with multifunctional receptacle
• HF electrodes (shaft diameter: 4 mm)
Erbe recommends the use of Erbe HF electrodes. If the handle is
operated with HF electrodes from another manufacturer, please
observe the following: The joint from handle to HF electrodes of
other manufacturers is not standardized. The HF electrode of an-
other manufacture, although it may appear to fit the Erbe han-
dle, may have different dimensions and tolerances, a different
type of insulation, etc. Such differences hold risks for patient and
staff. Erbe Elektromedizin is glad to provide more information as
required.
This product is not intended for direct contact with the heart or
the central circulatory system.
2

Maximum electrical capacity

The maximum electrical capacity is given on the instrument in
[V ].
p
17