Status Indicator; Adjust Volume; Flight Mode - Cochlear Baha 5 SuperPower Bedienungsanleitung

Using your sound processor
The buttons on your sound processor let you
adjust your volume level, choose from your
pre-set programs, and enable/disable wireless
streaming. You can choose to enable the audible
and visual indicators to alert you of changes to the
settings and processor status.
Your sound processor is programmed to be
used as either a left or right-sided device. Your
hearing care professional will have marked your
processor(s) with a L or R indicator. If you are a
bilateral user, changes you make to one device will
automatically apply to the second device.
On/off
See figure 2
1 2 Turn on your sound processor by
connecting the battery module.
Turn off your sound processor by
3
disconnecting the battery.
When your sound processor is turned off and
then back on again, it will return to the default
setting (program one).

Status indicator

See figure
Your sound processor is equipped with audible and
visual indicators. For an overview of the audible
and visual indicators, refer to the table at the back
of this section.
Your hearing care professional can disable the
audible and/or visual indicators if you prefer.
Change program
See figure
Together with your hearing care professional you
will have selected up to four pre-set programs for
your sound processor:
Program 1:
Program 2:
Program 3:
Program 4:
6
These programs are suitable for different listening
environments. Ask your hearing care professional
to fill in your specific programs.
To switch programs, press and hold the upper
button on your sound processor. If enabled,
audible and visual indicators will let you know
which program you are using:
Program 1: 1 beep and 1 flash
Program 2: 2 beeps and 2 flashes
Program 3: 3 beeps and 3 flashes
Program 4: 4 beeps and 4 flashes

Adjust volume

See figure
1 Press and release the upper button to increase
volume.
Press and release the lower button to decrease
2
volume.
You can adjust the volume level with the
optional Cochlear Baha Remote Control, the
Cochlear Wireless Phone Clip or an iPhone,
iPad or iPod touch (see Made for iPhone
section).
3
Wireless accessories
You can use Cochlear Wireless accessories to
enhance your listening experience. Ask your
hearing care professional to learn more about
your options or visit
To activate wireless audio streaming, press
and hold the lower button until you hear a
4
melody. See figure
To end wireless audio streaming, press and
hold the upper button. The sound processor will
return to the previous program.

Flight mode

When boarding a flight, wireless functionality
must be deactivated because radio signals may
not be transmitted during flights. To disable
wireless operation:
5
www.cochlear.com.
6
See figure 8