Care And Maintenance - PeakTech 3415 USB DMM Bedienungsanleitung

4. Run the PC-LINK software, click the SET menu; select the
System Set; then select the proper COM port in the Serial Port
Select. As for the proper COMport, we can view it in the Device
Manager by following these steps.
* Right-click the My Computer icon on the Windows desktop,
and then click Properties.
* Click the Hardware tab and then click Device Manager.
* Scroll through the list of installed devices till you locate the
Ports (Com and LPT) entry. Click the plus (+) beside this
entry to view the installed ports, If no errors occur, the
Sunplus USB to Serial COM Port (COM x) will appear, COM
x is just the proper port, here x is a specific number.
5. Select the default sampling rate or you can select other desired
sampling rate.
6. Now press the Start in the PC-LINK SOFT to measure and view
the synchronic data or graph in the software interface.
7. To disable the serial data output function, switch the meter to
OFF location first.
8. More information about the PC-LINK SOFT, please refer to the
Help topic including in the SOFT

7. Care and Maintenance

7.1. Installing the battery
Your meter requires a 9 V battery for power. The battery symbol
appears when the battery voltage drops to the certain limits. For
proper operation, replace the battery as soon as possible. Continued
use with a low battery will lead to abnormal readings.
-51-