5.6. Transistor hFE Measurement
To measure transistor, set up the Meter as follows:
1. Check that the transistor is PNP or NPN type.
2. Insert the transistor to be measured to the corresponding
Transistor Jack.
3. The Meter displays the tested transistor´s nearest value.
Note:
*
When transistor measurement has been completed,
disconnect the connection between the testing clips and
the circuit under test and remove the testing clips away
from the input terminals of the Meter.
6. Maintenance of the unit
WARNING !
Remove all the test leads before changing battery.
6.1. Battery Replacement
WARNING !
To avoid false readings, which could lead to possible electric
shock or personal injury, replace the battery as soon as the
battery indicator "
"appears.
To replace the battery:
1. Turn the Meter power off and remove all connections
from the terminals.
-35-
4. Front View
8
7
6
5
3
4
-28-
1
2