Description Of The Unit; Kts 340; Product Description; Led-Status - Bosch KTS 340 Originalbetriebsanleitung

3.5

Description of the unit

The KTS 340 is a modular, portable diagnostic system
that can be used anywhere. The KTS 340 features a
computer unit with memory card and an 8.4 inch LCD
touchscreen. ESI[tronic] is pre-installed on the memory
card at the factory.
The operator has a choice of a stylus for the LCD
touchscreen and an on-screen keyboard.
The KTS 340 and accessories are supplied in a protec-
tive case.
8
7
6
5
4
3
Fig. 1:

KTS 340

1 Stylus holder
2 Stylus
3 On/Off button
4 Power supply unit connection
5 USB port
6 WLAN LED
7 Battery charge LED
8 LCD touchscreen
!
There is a risk of injury from glass splinters should
the LCD glass cover break.
CH2 CH1
DIAG
m ax. 60 V
3 4 5
1 2 6
Fig. 2: Rear view of KTS 340
1 Stylus compartment
2 CH2 measurement input
3 Ground connection
4 CH1(-) measurement input
5 CH1(+) measurement input
6 Diagnostic cable connection (DIAG)
7 Connection for Kensington security lock
Robert Bosch GmbH
3.6
For direct printing via USB, the KTS 340 must be linked to
a Bosch-approved printer via USB connecting cables and
the USB adapter (USB-A/A adapter) (refer to Online Help:
"
3.7
3.7.1
Battery charge LED
Green light
1
Flashing green
2
Yellow light
Flashing yellow
Red light
Flashing red
i
3.7.2
WLAN LED
Green light
Yellow light
Red light
Off
459843_1Ko
7
Product description | KTS 340 | 23
USB adapter
(Service) >> User settings >> Print settings").
LED status
Battery charge LED
Status
Battery fully charged, external
power supply connected.
Battery fully charged, external
power supply not connected.
Battery being charged, external
power supply connected.
Battery almost flat, connect
external power supply.
Fault on charging.
Battery flat, connect external pow-
er supply.
We recommend discharging the batteries completely
every six months, so that they keep working at
maximum capacity (see online help: "Introduction to
KTS 340 >> Battery maintenance").
WLAN LED
Status
WLAN is configured and KTS 340
is connected to an access point,
field strength good.
WLAN is configured and KTS 340
is connected to an access point,
field strength poor.
WLAN is configured, KTS 340 is
not connected to an access point.
WLAN is not configured.
en
|
1 689 989 038 2013-08-16