Bosch KTS 340 Originalbetriebsanleitung Seite 24

en 24 | KTS 340 | Commissioning
4. Commissioning
4.1 Connection
Prior to commissioning, make sure the mains voltage
matches the voltage specified on the power supply unit
(use the power supply lead provided).
i
The German power supply lead is included with
the unit.
4.2 Licensing with the
ESI[tronic] Startcenter
Before you can use the KTS 340 for control unit
diagnosis, install the ESI[tronic] Startcenter on a
PC/laptop and then license the KTS 340.
!
Do not connect the KTS 340 to the PC/laptop until
prompted to do so during the installation routine.
4.2.1 Installing the ESI[tronic] Startcenter
Procedure:
1. Close all open applications.
2. Insert the "ESI[tronic] Startcenter" DVD.
3. Open the "Windows Explorer".
Start D:\setup.exe
4.
 Setup commences.
 The following message appears with Win Vista:
An unidentified program is attempting
to access the computer.
 The following message appears with Win 7:
Do you wish to allow changes to be
made to this computer by the follow-
ing program?
5. Confirm the message with "Authorize" or "Yes".
6. Select the installation language and confirm with
<OK>.
i
The selected installation language will also be the
language used in the ESI[tronic] Startcenter.
|
1 689 989 038 2013-08-16
(D = DVD drive)
7. Follow the on-screen instructions.
i
Select the country in which the KTS 340 is to be
used in the "Country selection" installation menu.
The dialog box does not appear if a country was
already selected during an earlier installation of
Startcenter (e.g. with KTS 200).
i
If Adobe Reader is not yet installed on the PC/laptop,
it will be installed at the end of the ESI[tronic] Start-
center installation routine. Adobe Reader is required
to display the KTS 340 control unit diagnosis logs on
the PC/laptop.
i
We recommend that you only install the KTS data
packet on the hard disk if you wish to update several
KTS units. Then, the ESI[tronic] Startcenter DVD will
not be required for update.
 The following message appears with Win Vista:
Do you wish to install this device
software?
8. Confirm the message with "Install".
Robert Bosch GmbH