Installation; Operation - DENTSPLY Spectrum 800 Handbuch

INTRODUCTION
Intensity Adjustment:
clinician. DENTSPLY does not, at this time, make any specific technique recommendations regarding the clinical use of
this variable light output feature. The information provided in the "Variable Intensity Feature Technique Card" is for
general "guidance" purposes only, and does not constitute a specific technique recommendation by DENTSPLY.
High Light Output Power
Open Run Time
Cycle Interrupt
Preset Run Times
Built in Radiometer
Choice of 5 standard DENTSPLY Light Probes

INSTALLATION

NOTE:

OPERATION

unit power-up, always check and if necessary adjust to the desired intensity level as per "Optional Power Intensity
Adjustment" section (Page 5).
Use of this variable output feature is at the sole discretion of the
if previously set to a higher intensity.
— 4 —
upon every