Dcf Reception; If The Dcf Signal Is Not Received Within 10 Minutes; If The Reception Attempt Was Successful; Manual Triggering Of Dcf Reception - Conrad Electronic 64 02 49 Bedienungsanleitung

12.2 DCF reception

• After inserting the batteries, the base station displays the setting "12:00 AM, Fri-
day 1, January 1999".
• The base station attempts then to synchronise the DCF signal (time) for ten min-
utes. A tower symbol with wave motion (a symbol for the fact that the base
unit is carrying out a DCF reception attempt) appears in the display.
• Reception should be successfully completed within 3-5 minutes. The
"WAVE OK" symbol appears then in the display.

12.2.1 If the DCF signal is not received within 10 minutes

• The base station carries out a new DCF reception attempt every 30 minutes (for
the duration of 10 minutes each time) for the first 3 hours.
• If a DCF signal has still not been received, the device carries out the reception
attempt every 3 hours so long until the DCF reception has been successful.

12.2.2 If the reception attempt was successful

• The base station then carries out synchronisation to the DCF signal automatically
twice a day (1:00 a.m. and 1 p.m.). This means that a very high precision of the
time displayed is guaranteed.
• If a reception attempt should fail, the device will repeat the reception attempt
every 3 hours until it is successful.
12.1.2 Manual triggering of the DCF reception
• The DCF reception can also be triggered manually. Press the button WAVE (H) on
rear of the base station.

13. Settings

The base station and the outdoor sensor offer you some manual setting possibilities.
The values set for the time and calendar are updated automatical-
ly as soon as the device has successfully carried out the DCF
reception.
13.1 Setting the temperature display °C or °F
You can choose between the display of the temperature in degrees Celsius (°C) or
Grad Fahrenheit (°F).
34
(G) Touche RE-SYNC
Touche pour déclencher manuellement la réception de la température extérieure.
(H) Touche WAVE
Touche pour déclencher manuellement la réception DCF.
(I) Couvercle du logement des piles
Capteur extérieur
(J) Touche RESET
Touche pour rétablir le réglage d´usine du capteur extérieur.
(K) Touche °C/°F
Touche de réglage du format d´affichage de température degrés Celsius ou
Fahrenheit
(L) Couvercle du logement des piles
(M) Support mural
(N) DEL de transmission
Affichage à DEL, s´allume pendant le processus d´émission.
(O) Ecran LCD du capteur
Affichage supplémentaire de la température extérieure.
(P) Touche non assignée, destinée uniquement au service d´assistance technique.
Affichages de la station de base
(1) Heure
L´heure en heures, minutes, secondes.
(2) MONTH
Affichage du mois
(3) DATE
Affichage de la date.
(4) DAY
Affichage du jour de la semaine.
Affichage du jour de la semaine :
Afficheur Signification
MON Lundi
TUE Mardi
WED Mercredi
THU Jeudi
FRI Vendredi
SAT Samedi
SUN Dimanche
(5) INDOOR
Affichage de la température intérieure
(6) OUTDOOR
Affichage de la température extérieure
47