Description; Progressive Metering Devices Model Ssv And Ssv M; Progressive Plunger Metering Devices - General; Features Of A Progressive Metering Device - Lincoln Quicklub SSV Benutzerinformation

User Manual
Operating Instructions

Progressive Metering Devices Model SSV and SSV M

Fig. 9 Metering device type SSV 8 shown as a demonstration
model
Fig. 10 SSV 8 with piston detector
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259

Description

Progressive Plunger Metering Devices - General

The progressive metering devices
- are piston-operated metering devices;
- automatically (progressively) dispense the lubricant fed
by the pump to the connected lubrication points;
- model SSV have a lubricant output of 0.2 cm³ per
outlet and piston stroke;
- model SSV M have a lubricant output of 0.07 cm³ per
outlet and piston stroke;
- when one or more outlets are closed (see "Combining
outlets") they can dispense a double or multiple lubri-
cant quant ity;
- are available with 6 to 12 outlets or up to 22 out lets;
- of fer the option of combining several lubrication points
into one cent ralized lubrication point.
- meter the supplied lubricant into predetermined single
quantities.
- can be monitored visually (SSV and SSV M)or elec-
tronically (only SSV).
Any blockage in a lubrication circuit is indicated by grease
leaking from the respective pressure relief valve.
1 00027 09

Features of a Progressive Metering Device

The term "progressive" refers to the special features of
the lubricant distribution within the metering devices,
e.g.
- the successive movements of the individual pistons
within the metering device due to the supplied lubricant
being under pressure;
- the pistons move in a predetermined order and the cy-
cles are repeated constantly;
- each piston must have completed its movement fully
before the next pist on can be moved, no matter whet her
the lubricant is dispensed continuously or intermittently;
- the pistons operate interdependently of one another;
- no lubrication point which is connected to the system is
1 00027 10
omit ted.
2.2EN-20001-I11
Page 9 of 24