Configuring Monitoring Functions; Disabling Automatic Start Of The Simatic Ipc Diagmonitor Management Explorer; Configuring The Maintenance Stations; Additional Information - Siemens SIMATIC IPC647D Produktinformation

Configuring monitoring functions

Perform the configuration of the monitoring functions for all the monitored stations.
Requirement
You have started the SIMATIC IPC DiagMonitor Management Explorer with administrator rights.
1. Select
– In Server 2012 R2: "Start > Apps > SIMATIC DiagMonitor > Management Explorer"
– In Windows 10: "Start > All Apps > SIMATIC DiagMonitor > Management Explorer"
The SIMATIC IPC DiagMonitor Management Explorer starts.
2. Select the menu command "Station > Add...".
3. Select the "Local station" for which you want to monitor certain events.
4. Configure the desired events, for example, cyclic operating hour interrupts.
5. Confirm your entries.
Disabling automatic start of the SIMATIC IPC DiagMonitor Management
Explorer
The DiagMonitor monitoring software starts automatically when you log on to your device. The SIMATIC IPC DiagMonitor
Management Explorer configuration tool is then displayed automatically. You can disable this function.
1. Select the "Settings" item in the "Tools" menu of the SIMATIC IPC DiagMonitor Management Explorer configuration tool.
2. Disable the "Start with Windows" option.
3. Confirm your entries.

Configuring the maintenance stations

You can find information on how to monitor a PC station from the maintenance station in the "Configuring the maintenance
stations" chapter of the "Process Control System PCS 7 Maintenance Station" function manual.

Additional information

You can find details about device features in Product Equipment Data (PED) tool (http://www.siemens.com/ped).
You can find up-to-date information and manuals for SIMATIC PCS 7 at: SIMATIC PCS 7 technical documentation
(http://www.siemens.com/pcs7-documentation).
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose
use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot
be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any
necessary corrections are included in subsequent editions.
Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
SIMATIC IPC647D/847D
SIMATIC IPC647D/847D
A5E41792571-AA, 7/2017
A5E41792571-AA, 7/2017
31