Security Information; Validity; Information On Initial Commissioning And Restoring Of The System; Settings On The Pc - Siemens SIMATIC IPC647D Produktinformation

Security information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants,
systems, machines, and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions only form one
element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks. Systems, machines
and components should only be connected to the enterprise network or the internet if and to the extent necessary and with
appropriate security measures (e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens' guidance on appropriate security measures should be taken into account. For more information about
industrial security, please visit:
http://www.siemens.com/industrialsecurity.
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly
recommends to apply product updates as soon as available and to always use the latest product versions. Use of product
versions that are no longer supported, and failure to apply latest updates may increase customer's exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under
http://www.siemens.com/industrialsecurity.

Validity

This product information contains important information on commissioning your PC. The product information is part of the
supplied product and the information it contains supersedes other information provided in the manuals and online help.

Information on initial commissioning and restoring of the system

Settings on the PC

Note
Setting the resolution and refresh rate
The resolution of your monitor is preset to 1280 x 1024 at a refresh rate of 60 Hz. Make sure that your monitor supports
these settings. Set these parameters to an ergonomic value if needed, to enable them to be displayed by the monitor you
have connected.
Monitors of the latest generation automatically adjust resolution and refresh rate to best match the operating system.
Deviation from the preset default values can occur in this process.

Arrangement of the monitors for devices with multi-VGA

Multi-display configurations are possible with your device.
You can operate up to two displays using the corresponding on-board interfaces. For operation of up to two more displays,
your device can be extended with an additional NVidia graphics card.
One of the on-board interfaces must be used as the primary display for commissioning.
Use only the display device designated as the primary display for commissioning your system.
Because there are many different possible connection types and operating configurations of the displays, no default settings
for these are configured for commissioning.
SIMATIC IPC647D/847D
A5E41792571-AA, 7/2017
19