Safety Instructions; General Power Tool Safety Warnings - Parkside Performance PABSP 20-Li B2 Bedienungs- Und Sicherheitshinweise

Recommended ambient temperature:
While charging:
During operation:
During storage:
Noise emission value
The measured values have been determined in
accordance with EN 62841 . The A-rated noise
level of the power tool is typically as follows:
Sound pressure level L
pA
Uncertainty K :
pA
Sound power level L :
WA
Uncertainty K :
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Drilling into metal:
Hand/arm vibration a
h,D
Uncertainty K:
m
WARNING!
Wear ear protection!
NOTE
The declared vibration total value and
u
the declared noise emission value have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another .
The declared total vibration value and the
u
declared noise emission value may also
be used for a preliminary assessment of
exposure .
26 GB/IE
+4 to +40 °C
+4 to +40 °C
+20 to +26 °C
: 79 .1 dB(A)
3 dB
90 .1 dB(A)
3 dB
: < 2 .5 m/s
2
(1,27 m/s )
2
1 .5 m/s
2
m
WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed .
Try to minimise exposure to vibration and
noise . Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time . All
parts of the operating cycle must be taken
into account (e .g . times when the power
tool is switched off and when it is running
idle in addition to the trigger time) .

Safety instructions

˜ General power tool safety
warnings
m
WARNING!
Read all safety warnings,
u
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury .
Save all warnings and instructions for
future reference.