Safety Instructions; About These Safety Instructions; Assembly Personnel Requirements; Notices And Symbols - HAWA Frontslide 60/matic Planungs- Und Montageanleitung

H A W A

Safety instructions

About these safety instructions

These assembly instructions form an integral part of the instructions for operation and use. They only contain
safety information and notices that are relevant to assembly of the sliding shutters. Generally applicable safety
notices contained in the instructions for operation and use must also be strictly observed.

Assembly personnel requirements

Assembly personnel must have read and understood the safety instructions as a prerequisite to performing
the tasks described in these assembly instructions.

Notices and symbols

Danger warnings
The following hazard warning symbols appear in these assembly instructions:
Stop
Caution
Notes and information
Note
Information

Use of the product

Intended use
The HAWA-Frontslide 60/matic is to be used exclusively in the following fields of application. Any other use is
considered improper and is strictly forbidden.
The HAWA-Frontslide 60/matic is intended solely for covering windows to provide screening and shade.
Proper use also requires compliance with these planning and assembly instructions, observation of
requirements for qualified personnel, and schedules for inspection and maintenance.
Inappropriate use
These sliding shutters do not afford break-in protection and are therefore absolutely no substitute for
installations purpose-designed to protect against physical intrusion. There is no application known that can be
identified as improper use.
Subject to modification
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78
– Frontslide 60/matic
Warning of dangers, which if ignored can result in severe injuries or death.
Warning of dangers, which if ignored can result in injuries, and/or material
damage.
Directions on how to proceed, which if ignored can result in disturbances and/or
in a loss of production.
Text marked with this symbol contains practical information and hints provided for
an optimised use of the installation or appliance. If the information is not
observed, the respective performance specified in the technical data may no
longer be guaranteed.
3