Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Precautions - PeakTech 1080 Bedienungsanleitung

Prüf- und messtechnik
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Safety Precautions

This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) and 2006/95//EC (Low Voltage) as amended by
2004/22/EC (CE-Marking).
Overvoltage category III 600V; pollution degree 2.
CAT I:
For signal level, telecommunication, electronic with small
transient over voltage
CAT II:
For local level, appliances, main wall outlets, portable
equipment
CAT III:
Distribution level, fixed installation, with smaller transient
overvoltages than CAT IV.
CAT IV:
Units and installations, which are supplied overhead
lines, which are stand in a risk of persuade of a lightning,
i.e. main-switches on current input, overvoltage-diverter,
current use counter.
To ensure safe operation of the equipment and eliminate the danger
of serious injury due to short-circuits (arcing), the following safety
precautions must be observed.
Damages resulting from failure to observe these safety precautions
are exempt from any legal claims whatever.
* Do not use this instrument for high-energy industrial installation
measurement.
* Do not exceed the maximum permissible input ratings of 600V
AC/DC (danger of serious injury and/or destruction of the
equipment).
-22-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis