Technical Data; Safety Precautions; Symbols Used In The Manual - FLORABEST FGH 710 A1 Originalbetriebsanleitung

Technical data

Garden Cultivator .................. FGH 710 A1
Motor power input ...................... 710 W
Rated input voltage .... 230 V~, 50 Hz AC
Safety class ......................................
Degree of protection ........................ IP24
Working width ..........................360 mm
Max working depth ............max. 180 mm
Number of tine wheels ..........................4
Nominal rotation rate ..... approx 230 rpm
Weight .................................... 7.85 kg
Acoustic pressure level
(L ) ............... 81 dB (A), K
pA
Sound power level (L
Measured ..... 91 dB (A), K
Guaranteed .......................... 93 dB (A)
Vibration at hand grip (a
Noise and vibration values have been
determined according to the standards and
regulations named in the declaration of
conformity.
Technical and optical alterations may be
made without notice for the purposes of
improvement. No guarantee can be given
for the accuracy of dimensions, notices
and specifications stated in this manual.
The manufacturer shall therefore not accept
liability for statutory claims arising from the
manual.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
= 3 dB (A)
pA
)
wA
= 2 dB (A)
wA
) ......... 2.7 m/s
h
K = 1.4 m/s
h
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
II the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety precautions

2
This section deals with the basic safety
2
regulations while working with the electric
tiller.

Symbols used in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
GB MT
31