Loading Paper In The Printer; Loading Paper - Sony UP-D895 Gebrauchsanweisung

Loading Paper in the
Printer
Notes
• Before loading paper in the printer, see "Storing and
Handling Paper" (on page 7).
• Always handle print paper carefully when loading to
avoid adversely affecting the quality of the printed
pictures. Never bend or crease the paper and never
touch the printing surface with your fingers.
Fingerprints perspiration can blur printing.
• Do not use any paper other than UPP-110S/110HD/
110HG paper. (page 7)
• Confirm that the PAPER TYPE switch is set correctly
for the type of paper loaded in the printer. (page 4)

Loading Paper

1
Press the power ON/OFF switch to turn the printer
on. The power lamp lights.
2
Press the OPEN button to open the paper door.
8

Loading Paper in the Printer

3
Remove the label from the leading edge of the
printer paper, pull out about 15~20 cm (about 6~8
in.) of the paper, and then set the paper roll in the
paper tray.
Note
To avoid exposing the printer paper to dust, dirt, etc.
always handle it carefully when removing from its
package and loading it in the printer. Paper exposed
to dirt or dust cannot be used for printing.
Load the paper with the print
side (heat sensitive side) up.
Printing is not possible if the
paper is reversed.
Make sure that the paper is set straight.
Remove label and
pull out 15~20 cm
(about 6~8 in.)