Specifications; Printer; Interface; Parallel Interface - Sony UP-D895 Gebrauchsanweisung

Specifications

Printer

Thermal head Thin-film thermal head, 1280 dots
Gradation 256-level gradation (8-bit)
Memory capacity
4096 × 1280 × 8 (bit)
320 × 100 mm (max.)
Picture size
Printing speed About 5.1 sec./image (1280 × 1280
dots)
Picture elements
4096 × 1280 dots (max.)
Dot density H: 100 mm/1280 dots = 0.078
V: 100 mm/1280 dots = 0.078
Square dots
Power supply 100 to 120V AC, 50/60Hz, 1.5A
220 to 240V AC, 50/60Hz, 0.8A
Temperatures Operating
5°C ~ 35°C (41°F ~ 176°F)
Storage/Transport
–20°C ~ 60°C (–4°F ~ 140°F)
Humidity Operating
20% ~ 80%
Storage/Transport
20% ~ 90%
154 × 105 × 260 mm (w × h × d)
Dimensions
6.1 × 4.1 × 10.2 in. (w × h × d)
Weight 3.4 kg (1.54 lb.) (printer only)
Accessories provided
Printer paper UPP-110HG × 1 roll
AC power cord × 1
Thermal head cleaning sheet × 1
Printer driver × 1
Instructions for Use × 1
Service Contact List × 1
Software License × 1
Media label × 1
12
Specifications

Interface

Parallel Interface

Control connector
Data transmission
Logic level
Parallel Interface Connector Pin
Assignment
H
Pin
V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16-17
18
19-30
31
32
33
34
35
36
UP-D895 is compatible with the Compatible, Reverse
Nibble, and ECP Modes with the bi-directional parallel
interface (IEEE STD 1284-1994).
IEEE1284-B Connector (D-sub 36-
pin)
Input: 5V (TTL) (max.)
Output: 5V (TTL) (max.)
8-bit, parallel, IEEE STD 1284-1994
Standard
Compatible, Reverse nibble, ECP
TTL
I/O Signal
Interface Mode
Compatible Nibble
I nStrobe HostClk
I/O Data1 (LSB)
I/O Data2
I/O Data3
I/O Data4
I/O Data5
I/O Data6
I/O Data7
I/O Data8 (MSB)
O nACK PtrClk
O Busy PtrBusy
O Perror AckDataReq
O Select Xflag
I nAutoFd HostBusy
Not defined
GND
O Peripheral Logic High (pull up to +5V at 1kΩ)
GND
I nInit nInit
O nFault nDataAvail
Not defined
Not defined
Not defined
I nSelectIn IEEE 1284
Active
ECP
HostClk
PeriphClk
PeriphAck
nAckReverse
Xflag
HostAck
nReverseRequest
nPeriphRequest
IEEE 1284
Active