Loading The Paper Roll And Ink Ribbon - Sony SnapLab UP-CR20L Handbuch

When the administration screen appears, the ribbon
door will unlock.
Loading the Paper Roll and Ink
Ribbon
When you use the unit for the first time, load the paper roll
and ink ribbon.
To load the paper roll
Notes
• Be sure to remove the output cover, output tray, and
scrap receptacle before loading the paper roll.
• Be careful that your fingers and clothing are not caught
in the paper door or on the protuberance in the opening
of the door.
1
Press and lower the paper door lever, hold the paper
door at the center portion, and pull the door forward
until it locks into the open position.
26
Loding the Paper Roll and Ink Ribbon
2
Remove the paper core.
3
Insert the paper core into the paper roll.
The two sides of the paper core are the same shape.
You can insert either side.
4
Depending on the width of your paper roll, attach or
remove the paper adapters.