Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
ENGLISH
Introduction
Thank you for purchasing one of our products. Please read instructions
on use in this manual as well as the safety rules given in the attached
booklet and follow them carefully to get the best performance from the
plant and be sure that the parts have the longest service life possible. In
the interest of customers, you are recommended to have maintenance
and, where necessary, repairs carried out by the workshops of our serv-
ice organisation, since they have suitable equipment and specially trained
personnel available. All our machinery and systems are subject to con-
tinual development. We must therefore reserve the right to modify their
construction and properties.
Description
7
7
Semiautomatic welding machine with continuous wire, three-phase sup-
ply, trigger regulation and incorporated suctioning, suitable for use with
7
gas or CO
mixtures and with cored wires without gas; suitable for use in
2
medium carpentry and body shops, in agriculture and for maintenance.
7
Well-built and easy to use, with innovative design, SMARTMIG T25 af-
fords excellent weld performance using aluminium and stainless steel
8
wires.
The main characteristics of the SMARTMIG T25 welding machine are:
8
• Exceptional welding characteristics with all materials as a result of
inductance levelling;
8
• Excellent welding performance on thin metal sheets;
• Provided with standard gas cylinder trolley with sturdy wheels to fa-
8
cilitate movement;
• Supporting structure in metal with front panel in special shockproof
9
material;
• Sturdy handle integrated with front panel;
9
• Adequate internal space for conveniently storing metal spools (Max
300 mm - Max 20 kg);
9
• QBS - Exhaust-brake system permitting repeated continuous arc
strikes;
9
• Burn Back and automatic external adjustable start system;
• Central Euro connection on torch;
9
• Rapid coupling for earth cable;
• Professional wire feeder guaranteeing precise and continuous wire
10
feeding.
10
Technical data
10
11
The technical data for this equipment is summarized in the table 1.
11
Model
64
Three phase 50/60 Hz
Setting range
65
65
Fuse
68
Power factor
69
Usable current at 100%
71-74
Usable current at 60%
75
Usable current at 35%
Usable current at 25%
76
Wire dimensions
77
Insulation class
Degree of protection
Dimensions
Usage limits (ISO/IEC 60974-1)
The use of a welder is typically discontinuous, in that it is made up of
effective work periods (welding) and rest periods (for the positioning of
parts, the replacement of wire and underflushing operations etc). This
welding machine is dimensioned to supply I
A), in complete safety, for a work period amounting to (25%) of total
usage time. The regulations in force establish the total usage time to be
10 minutes. If the permitted work cycle time is exceeded, an overheat
cut-off occurs to protect the components around the welder from dan-
gerous overheating. The orange pilot light of the thermostat on the ma-
chine rack panel lights up when the heat protection mechanism starts
7
Table 1
SMARTMIG T25
V
230/400
A
25÷250
kVA
6
16 (230V)
A
10 (400V)
cosϕ
0,97
V
17-38
A
120
A
160
A
210
A
250
mm
0,6÷1,2
H
IP 23
mm
830-615-400
kg
54
max nominal current (250
2
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
