Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Art. No. 11439
Carlo Plus
TRANSPORTING CYCLES ON THE TOWBAR
Assembly instructions
Dear customer,
Thank you for purchasing this product. This rear cycle rack has been checked to see it is com-
plete. The rear rack is epoxiert, and the hollow spaces are coated inside which prevents the
metal rusting. If this coating is impaired in any way (scratched, damaged), ensure that the
protection is repaired!
Before starting to assemble the product, ensure that the rear cycle rack is complete and read
the assembly instructions carefully; observe the safety information. Please remember that
some of the parts included in the parts list have already been pre-assembled. Subject to tech-
nical amendments.
Towbar conditions for the cycle rack Carlo Plus
The cycle rack can be mounted onto all towbar balls under the following conditions.
The maximum useful load of the cycle rack is: 60 kg
Test the suitability of the towbar.
The towbar type must have been officially approved.
The ball and towbar itself need to be cast as one part.
The towbar material must have a minimum quality of St 52-3.
Supporting load
50kg
60kg
75kg
90kg
Note: Usually the towbars are made of St 52-3. Cast material such as e.g. GGG 40 is not suit-
able (only suitable from GGG 52 upwards). Not suitable for aluminium towbars. The following
towbars are currently made of GGG 40: If in doubt ask the manufacturer of the towbar.
Manufacturer of
the towbar
Westfalia
Deadweight
14 kg
14kg
14kg
14kg
Test symbol
F 4192
F 3830
F 4112
9
Useful load
36kg
46kg
max. 60kg
max. 60kg
Suitable for
vehicle type
Audi A4
Audi A6
Audi A8
Werbung
