Herunterladen Diese Seite drucken

Eufab Carlo Plus Montageanleitung Seite 12

Fahrradtransport auf der anhängerkupplung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
When not in use, the bike carrier should be removed.
When transporting bikes, do not cover with a blanket or similar.
The maximum speed is 130 Km/h
For proper and safe fitting, follow the fitting instructions precisely. If in doubt when referring
to these instructions, ask the dealer or the manufacturer directly for further information. For
your own safety, regularly check the carrier and its loading, as you are obliged to do so under
§ 23 of the German highway code and will be held liable in the event of damage.
The manufacturer and dealer will not be liable for damages to property or injuries to people
caused by incorrect fitting or improper use.
The product has been tested and tried even under extreme conditions and produced good
results with respect to safety and grip. We are therefore able to exclude malfunctions if the
fitting has been carried out correctly.
Dear Customer, in observance of the German highway code and the existing bearing load and
max. loading capacity, this rear bike carrier may also be used for transporting other goods or
objects. However, secure fixing of these goods or objects must be guaranteed.
You can modify the design of this rack using original parts from EUFAB:
Art. No. 11446 expansion set for the 3
(needs to be ordered separately)
Art. No. 11402 a quick release fastener for fast and simple assembly to the towbar.
Art. No. 11232 lockable frame holder 115mm
Art. No. 11225 lockable frame holder 180mm for the 3
Art. No. 11233 lockable frame holder 310mm
And because the attachment for the 3
will also need the lockable frame holder 11225. This frame holder can be fitted with large
clips on both sides. This set of clips is included in the delivery scope.
Art. No. 11442 wedge washer
In the case of some towbars, the rack table may tilt somewhat toward the road surface. To
compensate this tilt, we also supply a wedge washer which is position between the base and
the rack table.
Base
Wedge
rd
cycle
rd
cycle
rd
cycle involves attachments from cycle to cycle, you
Rack table
12

Werbung

loading