Printing From The Computer - Sony UP-DR250 Handbuch

Attaching the Output Tray Adapter
The output tray adapter prevents printouts from sticking
out of the output tray.
Use the adapter when printouts curl as shown.
Adjust the position of the output stopper according to
printout size and the amount of curling in printouts.
There are four positions to which to adjust.
Output stopper adjustment example
If there is a large amount of curling in the printouts, set the
output stopper to a higher position.
22

Printing from the Computer

Printing from the
Computer
LCD
1
Turn on the printer and computer.
After a few seconds, the following message should
appear on the LCD. While READY is being displayed
on the LCD, the printer is ready to print.
Printing pack currently used
Displays the remaining amount of
ink ribbon, whichever is less.
2
Send the image data from the computer to be printed.
The printer starts printing.
For details, refer to the instructions for the printer
driver included on the CD-ROM disc supplied.
A While the printer is receiving the image data, the
following message should appear.
1