Replacing The Fec Filter Pad En - Abicor Binzel FEC W3 Betriebsanleitung

9 Maintenance and cleaning
9.4.4 Replacing the FEC filter pad
1 Housing
2 FEC filter pad
Fig. 16 Replacing the FEC filter pad
1 Place a protective underlay (fleece, cardboard, blanket, or similar) on the floor. Ensure it is large enough for the area you
want to protect.
2 Place the device on the protective underlay and turn it onto its back.
3 Loosen the four mounting screws (4) with the Allen key.
4 Remove the cover grille (3).
5 Remove the filter pad (2).
6 Insert the cleaned or new filter pad (2).
7 Mount the cover grille (3).
8 Insert the four mounting screws (4).
9 Tighten the four mounting screws (4) with the Allen key.
10 Bring the device into an upright position again.
11 Remove the protection.
EN - 26
3 Cover grille
4 Mounting screws
FEC W3
1
2
3
4
BAL.0675.0 • 2019-09-16