Disposal; Packaging - Abicor Binzel FEC W3 Betriebsanleitung

FEC W3

12 Disposal

When disposing of the system, local regulations, laws, provisions, standards and guidelines must be observed. To correctly
dispose of the product, it must first be disassembled.
12.1 Materials
This product is made to a small extent from metallic materials, which can be melted in steel and iron works and are thus almost
infinitely recyclable. The plastic materials used are labelled in preparation for their sorting and separation for later recycling.
12.2 Consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These substances must be
stored, transported and disposed of in suitable containers. Please observe the relevant local regulations and disposal
instructions in the safety data sheets specified by the manufacturer of the consumables. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the information provided by the consumables'
manufacturer.
The disposal of dust collecting bags is subject to special waste regulations. The dust must not enter sewage systems or be
disposed of together with normal household waste. Please observe the local and official regulations.

12.3 Packaging

ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle packaging
materials is always considered during their selection.
BAL.0675.0 • 2019-09-16
12 Disposal
EN - 29