Connector For Separate Exhaust Air Hose En; Establishing The Electrical Connection En - Abicor Binzel FEC W3 Betriebsanleitung

FEC W3
6.4 Connector for separate exhaust air hose
1
Mounting screws (4 pieces)
Fig. 9 Separate exhaust air hose
1 Loosen the mounting screws (1).
2 Dismantle the exhaust air grille (2).
3 Connect the exhaust air hose (3) to the fume extraction system.
6.5 Establishing the electrical connection
 13.1 Circuit diagram on page EN-30
WARNING
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• Before establishing an electrical connection between the product and the mains, check whether the operating voltage
indicated on the nameplate corresponds to the mains voltage.
BAL.0675.0 • 2019-09-16
3
2
Exhaust air grille
6 Putting into operation
1
2
3
Exhaust air hose
EN - 17