Maintenance And Cleaning; Maintenance Intervals En - Abicor Binzel FEC W3 Betriebsanleitung

FEC W3

9 Maintenance and cleaning

Regular ongoing maintenance and cleaning are prerequisites for a long service life and trouble-free operation.
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly and repair work:
• Switch off the FEC W3 extraction system.
• Close off the compressed air supply.
• Disconnect all electrical connections.
WARNING
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• Suitable safety measures must be taken before performing maintenance and cleaning work.
• Maintenance and cleaning work must only be carried out on the extraction system in areas with locally filtered forced
ventilation.
• Only qualified personnel are permitted to perform work on the device or system.
• Check and wear your personal protective equipment.
• Personal protective equipment consists of protective clothing, safety goggles, a class P3 respiratory mask, protective
gloves and safety shoes.
9.1 Maintenance intervals
The extraction system must be cleaned and inspected by qualified personnel as part of maintenance. Any dirty parts that
cannot be cleaned adequately must be replaced. These dirty parts must be placed in bags that are impermeable (so dust
cannot escape) and disposed of in accordance with regulatory stipulations.
NOTICE
• The specified maintenance intervals are standard values and refer to single-shift operation.
• We recommend recording the inspections. The date of the inspection, the detected defects and the name of the
inspector must be recorded.
BAL.0675.0 • 2019-09-16
9 Maintenance and cleaning
EN - 19