Appendix 2 Push Video Configuration; A2.1 Pin Connection - Avtech AVC792 Schnellstart

APPENDIX 2 PUSH VIDEO CONFIGURATION

This DVR supports sending instant event notifications to your mobile devices, such as iPhone, iPad and Android
mobile devices, for an alarm event (Push Video). However, only certain alarm-in pins support this function. For details,
please check the instructions below.

A2.1 PIN Connection

An I/O board might be supplied with the DVR to help you quickly know which pin supports Push Video, or you
may refer to the table below, or refer to "APPENDIX 1 PIN CONFIGURATIONS" at page 16.
 Models without HD video output
16CH Model
8CH Model
4CH Model
 Models with HD video output
With 9-pin I/O
block
With 7-pin I/O
block
With 6-pin I/O
block
Alarm sensor connection: take 4CH model without HD video output as an example
Connect the alarm sensor, such as magnetic contacts, to the I/O pin which supports Push Video.
PIN Corresponding
video channel
PIN2 CH1
PIN15 CH2
PIN3 CH3
PIN16 CH4
PIN2 CH1
PIN15 CH2
PIN1 CH1
PIN Corresponding
video channel
PIN6 CH1
PIN7 CH2
PIN8 CH3
PIN9 CH4
PIN6 CH1
PIN7 CH2
PIN6 CH1
22