Vga Output Resolution Support - Avtech AVC792 Schnellstart

When the operator password is entered,
is NOT allowed to access. The operator user level needs to be set in the main menu "SYSTEM"  "TOOLS".
To switch between these two user levels, click the current user level icon to switch to the key lock mode, and
move your mouse to show the password input keypad, and enter the password of the user level you want.

4.5 VGA Output Resolution Support

Users are allowed to change the resolution depending on their display monitor.
Right-click to display the main menu, and select "ADVANCED CONFIG"  "DISPLAY".
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
NOTIFY
EXIT
Move to "VGA OUTPUT", and select the VGA resolution you want. There are three options as follows:
 1024 x 768 (default)
 1280 x 1024
 1600 x 1200
Note: For 4CH models, "VGA OUTPUT" appears only when "PRIORITY" is set to "DISPLAY FIRST". For
details, please refer to "4.6 System Sources Reallocation".
Note: To have the best image quality on your LCD monitor, make sure (1) the selected DVR VGA output
resolution is supported by your monitor, and (2) the VGA output settings on both the LCD
monitor and DVR are consistent.
If the image is not positioned or scaled properly, please go to your monitor's menu for
adjustment. For details, please refer to the user manual of your LCD monitor.
ADVANCED CONFIG
FULL SCREEN DURATION
QUAD SCREEN DURATION
DWELL SCREEN DURATION
DISPLAY COVERT
HDD DISPLAY MODE
VIDEO OUTPUT
(For Selected Models Only)
ALPHA BLENDING
VGA OUTPUT
VGA DEINTERLACE
(For Selected Models Only)
COMPOSITE DEINTERLACE
will be shown on the status bar of the screen, and the main menu
(For Selected Models Only)
(For Selected Models Only)
(For Selected Models Only)
14
03
03
03
ON
HDD SIZE
BOTH
200
1024 x 768
ON
ON