Installation Of The Appliance; Room Ventilation; Assembly Appliances In Banks - Angelo Po 090FAA Bedien- Und Installationshandbuch

INSTALLATION OF THE APPLIANCE

All installation stages must be considered right from
production of the general layout. Before starting
these stages, as well as deciding the place of instal-
lation, if necessary, the person authorised to carry
out these operations must organise a "safety plan"
to protect the people directly involved, and he must
also ensure strict compliance with all legal require-
ments, especially those relating to mobile work-
sites.
The place of installation must have all the connec-
tions needed to supply the appliance and dispose of
the production residues, must be suitably lit and
must meet all legal health and hygiene require-
ments to prevent the contamination of the foods.
If necessary, fix the exact position of each individual
appliance or subassembly by mark coordinates to
locate them correctly.

ROOM VENTILATION

The room where the appliance is installed
must have air inlets to ensure that the appli-
ance can operate correctly and provide the neces-
sary air exchange in the room itself.
The air inlets must be of appropriate size and must
be protected by gratings and placed so that they
cannot be obstructed.
IT
GB

ASSEMBLY APPLIANCES IN BANKS

DE
To assemble appliances in banks (side by side)
proceed as described below.
FR
1 - Pull off the knob (A).
2 - Undo the screws (C) and remove the control
ES
panels (B).
3 - Apply masking tape to the edges to be placed
side by side.
4 - Apply food-approved sealant to the edges to be
placed side by side.
5 - Place the appliances side by side.
6 - Connect the appliance using the screws and
nuts (D-E).
7 - Remove the excess sealant and the masking tape.
8 - Apply the sealant to the inside of the lid (F), and
fit it to cover the fixing zone.
English
Appliances must be at some distance from the wall
(at least 5 cm if the wall is not designed to be resist-
ant to a temperature of at least 150°C)
Install in accordance with the relevant legislation,
regulations and specifications in the country of use.
A
C
D
- 12 -
IDM-39603612000.tif
IDM-39614501100.tif
B
F
E
IDM-39614501200.tif