Replacing A Bus Coupler - Aventics PROFIBUS DP Betriebsanleitung

2
Fig. 5: Exchanging a bus coupler on a CL03/CL03-XL VS, example
AVENTICS | PROFIBUS DP | R402003657–BAL–001–AG
8.1

Replacing a bus coupler

Applied electric voltage and high pressure
Danger of injury from electric shock and sudden pressure
drops.
O
Make sure the system is not under pressure or
connected to power when you exchange a module.
1
Risk of damage to the unit
There is a risk of damage to the bus coupler if its cover is
exposed to shocks and blows.
O
See to that the bus coupler is not exposed to blows.
O
Transport the unit well packaged.
WARNING
5
NOTICE
85
Replacement
3
4