Careful Handling And Use Of Electrical Power Tools; Safety Advice Relating Specifically To This Device - Parkside PPHSS 730 Bedienungs- Und Sicherheitshinweise

4. Careful handling and use of
electrical power tools
a) Do not overload the device. always
use an electrical power tool that is
intended for the task you are under-
taking. By using the right electrical power
tool for the job you will work more safely and
achieve a better result.
b) Do not use an electrical power tool if
its switch is defective. An electrical power
tool that can no longer be switched on and off
is dangerous and must be repaired.
c) Pull the mains plug out of the socket
before you make any adjustments to
the device, change accessories or
when the device is put away. This pre-
caution is intended to prevent you from uninten-
tionally starting the device.
d) When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone
use the device if he or she is not fa-
miliar with it or has not read the
instructions and advice. Electrical power
tools are dangerous when they are used by
inexperienced people.
e) Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device. Many accidents have their ori-
gins in poorly maintained electrical power
tools.
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g) Use the electrical power tool, acces-
sories, inserted tools etc. in accord-
ance with these instructions and
advice, and the stipulations drawn
up for this particular type of device.
In doing this, take into account the
General safety advice for electrical power tools
working conditions and the task in
hand. The use of electrical power tools for
purposes other than those intended can lead to
dangerous situations.
Safety advice relating
specifically to this device
avoiding the danger of injury, fire and
damage to your health:
J
Securely support the workpiece. Use clamps or
a vice to grip the workpiece firmly. This is much
safer than holding it in your hand.
J
Always switch on the electrical power tool be-
fore placing it against the workpiece. There is
also the risk of kickback.
J
Keep you hands away from the area of the
saw blade. Do not grip the underside of the
workpiece. Contact with the saw blade
may result in the risk of injury.
J
Make sure that the base plate
workpiece when sawing.
J
If a dangerous situation arises, pull the mains
plug immediately out of the mains socket.
J
Always work with the mains lead leading
away from the rear of the device.
WarNING!
with harmful / noxious dusts represents a risk to
the health of the person operating the device
and to anyone near the work area.
J
Do not saw materials containing substances
harmful to health.
J
Do not saw materials containing asbestos.
Asbestos is a known carcinogen.
J
When sawing wood and in particular when
working on materials that give rise to dusts that
are hazardous to health, the device must be
connected to a suitable dust extraction device.
J
Make sure you have adequate ventilation.
J
Do not work on moistened materials or damp
surfaces.
J
Switch off the electrical power tool after com-
pleting each stage of work but do not with-
draw the saw blade
it has come to a standstill.
9
NOxIOUS FUMES! Working
Wear protective glasses and a dust
mask!
from the cut until after
14
14
lies on the
GB 9