Factory Settings - Rt2 Reset - Oeg Rt2R Bedienungsanleitung

Signal power indication by receivers ET2X, versions up to V1.9
If the radio connection is established, R1 is activated and deactivat-
ed every 2 seconds. Receiver every 10 seconds lowers the recep-
tion intension, what is signalised with the light R2. Radio connec-
tion will operate without interceptions, if R1 is activated and deac-
tivated also by lowered signal intensity.
Signal power indication by receivers ET2X, version V2.0 or higher
If the radio connection is established, R1 is activated and deactivat-
ed every 2 seconds. Signal light R2 indicates the signal intensity
with flashing. Signal intensity is indicated with 1 to 5 flashes. Radio
connection will operate without interruptions if the light R2 flashes
at least 2 times.
Test mode automatically expires after 5 minutes. You can also end it by
i i i i
using the command ''Escape''.

Factory settings - RT2 reset

To restore the factory settings
hold keys and
20 seconds (Picture 26). Release
keys after you hear a beep.
Picture 25
for approx.
Picture 26
31
Settings manual