Program Timer - Programming - OEG RT2R Bedienungsanleitung

Program timer
Program timer has three channels: CH1, CH2 and CH3.
CH1 is used for programming the room heating (day / night),
CH2 is used for programming the domestic hot water warming,
CH3 is used for programming the comfort room heating.
Selecting the program channel
Hold key
after you hear a beep. Press key
lect the program channel you wish to modify.
Picture 10
Modifying the time program
Press key (
wish to modify. The display simultaneously writes out the time
command, the successive number of the program space (Picture
11) and switch-on/off command (picture 12, 13 and 14).
Time
command
Picture 11
and press key
) or ( ) to select the program place that you
(Picture 10). Release both keys
( ) or key
15
( ) to se-
Successive number
of the program space
User manual