Command To Quick Save And Quit (Escape); Battery Replacement - OEG RT2R Bedienungsanleitung

Command to quick save and quit (Escape)

Every time you wish to quick store and quit set-up, hold key
press key
i i i i
All modifications made, are stored. This command isn't valid for program
and service settings.

Battery replacement

Empty batteries are indicated with the
symbol on display. We suggest the
battery replacement every 2 years. RT2
is supplied with two alkaline batteries 1.5
V type AAA. Battery socket is inside the
RT2. To remove thermostat from the wall
plate, do the following. Hold thermostat
in height of keys and pull it towards your-
self (Picture 19 - OPEN). After battery
exchange, put RT2 back on the wall
plate, by doing the following. Hook RT2
on top and push it with bottom towards
the wall plate (Picture 19 - CLOSE).
Battery exchange should be done within 20 seconds. In other case
you will have to set the accurate time again.
User manual
. Release both keys after you hear a beep.
OPEN
Picture 19
22
and
CLOSE